Design Your Custom Pool Slide

Our free pool slide designer lets homeowners, pool builders and landscape designers lay out a custom fiberglass water slide in minutes. Pick one of our models or start from scratch, drag a section onto the drawing (or just click it to add it at the end), drag sections around to reorder them, then send the design to us for a quote with the form at the bottom. Looking for a ballpark first? Use our budget estimator.

Choose a model & customize if you like

Pick one of our layouts to load it, then change anything you like below. Every layout can be mirrored left or right.

1 · Slope

Standard: smooth, all-ages ride — our most popular. The start tub is first and the pool exit is always last.

2 · Add sections

Drag a section onto the drawing where you want it — the section it will go next to lights up — or click to add it at the end. Sections run from the tub toward the pool.

3 · Your slide

Drag any chip to a new spot to reorder, or drag it onto the drawing. Drag a section out of the slide (off the chips and the drawing) to remove it — or click its ×. ⇄ flips a curve between LH and RH.

RIDE LENGTH—
SECTIONS—
TURNS—
SUPPORT COLUMNS—
FOOTPRINT (OVERALL)—

4 · Send it to us

Fill in the form below and submit — your design goes with it automatically. Paradise Slides reviews and approves every final design before quoting; we may suggest changes so the slide fits your site and rides the way it should.

Download the drawing if you'd like to attach it or keep it. Nothing is sent until you submit the form.

© Paradise Slides, Inc. The slide sections, layouts and this design tool are proprietary to Paradise Slides, Inc. Drawings are for planning only. All designs are subject to review and approval by Paradise Slides before a quote is issued; installation drawings are issued with your order.

Top view, to scale, with the overall footprint dimensioned — drop sections straight onto the drawing, drag a section along it to move it, or drag it off the drawing to remove it. Orange circles show where support columns are typically poured; final locations come with your installation drawings.

This field is for validation purposes and should be left unchanged.
Name(Required)
Email(Required)
Address(Required)
Filled in automatically from the designer above. Put any notes (pool depth, deck height, timing) in the box below.

How the pool slide designer works

Every Paradise Slides water slide is built from the same family of fiberglass sections: a start tub, 5-foot and 3-foot straights, 90° left-hand and right-hand curves, half curves, and a pool exit. The pool slide designer puts those same pieces in your hands. Choose a slope, add sections in the order the rider will travel them, and the drawing updates to scale with the overall width and depth dimensioned so you can check it against your pool deck and yard. The ride length, number of turns and the number of support columns update as you go.

If you would rather not start from a blank drawing, choose one of our standard layouts from the model menu. Each one loads exactly as we build it, and you can mirror it left-to-right, add or remove sections, or flip a curve the other way. The model number tells you the ride length — a PS30R is about 30 feet of slide — so it is an easy way to see what a given length looks like on the ground.

Choosing a slope

Standard slides run an 18–23% grade and are our most popular choice: a smooth, all-ages ride that works for the widest range of backyards and can be built up to 100 feet long. Faster (our T5 models) steps up to about 28% for a quicker ride, and Speed (T10) runs about 35% for riders who want the fastest trip to the pool. The steeper slopes have a few design limits of their own — fewer back-to-back turns and shorter overall runs — and the designer flags those as you build. You can read more about each option on our water slide layouts page.

Design rules the tool checks for you

Good slide design is mostly about letting the rider settle between turns. The designer looks for a few things as you build: enough straight slide between opposite-direction curves, how many same-direction turns you have stacked together on the faster slopes, and long straight runs feeding into a curve, where we typically recommend splash guards. Anything that needs attention shows up under your slide list before you send the design, so you are not guessing.

The orange circles on the drawing mark where support columns are typically placed. Final column locations, heights and footing details come with the installation drawings issued with your order, so treat the designer's footprint as a planning dimension rather than a construction document.

What happens after you send a design

Paradise Slides reviews and approves every final design before issuing a quote. When you submit the form, your section list and design code come to our sales team along with your contact details. We check the layout for ride quality and fit, may suggest small changes, and then prepare a written quote. If you want a ballpark before you design anything, our budget estimator gives a quick range by slide length.

Tips for a better layout

  • Start with where the slide will enter the pool and work backward — the pool exit is always the last section.
  • Leave room around the start tub for the stairs or deck access the rider will use to climb on.
  • Use the footprint dimension to check the drawing against your pool deck, fences and setbacks before you fall in love with a layout.
  • Try a standard model first; most custom slides are a small change to a layout we already build.
  • Download the drawing or copy the design text if you want to share it with your pool builder or landscape designer.

Whether you are a homeowner planning a backyard pool, or a pool builder or landscape designer laying out a project for a client, the pool slide designer is the fastest way to get a custom slide from an idea to a quote. Browse our slide models for inspiration, build your layout above, and send it over — we will take it from there.